Free shipping on orders over $15

Shopping Cart

  • No products in the cart.

QK1058 NV4500 1-2 Synchronizer Assembly Without Shift Interlock

$324.98 $148.00

  • Shipping Icon
    Free
    Shipping
  • Shipping Icon
    Safe
    Payment
  • Shipping Icon
    Best
    Services
Categories :
  • Automotive parts
  • QK1058 1992-2007 NV4500 1-2 Synchronizer Assembly Without Shift Interlock is a New Venture Gear 1st-2nd Synchronizer Assembly for 1992-2005 Dodge and 1995-2007 GM NV4500 5 speed manual transmissions. QK1058 is factory assembled and it includes QU10038 Hub, QU10081 Clutch Ring, and QK1100 Synchro Strut Kit. NOTE: The shift Interlock feature was usually not used on transmissions with 5.61:1 1st gear ratio. Synchronizer assemblies do not include synchro rings.

    Also see QU10215 1-2 Synchro Assembly with Shift Interlock for 1992-1994 GM

    Need More Info? Use the handy Links below to access over 40 years of Dan’s product and vehicle specific Tech Notes to easily get the information you need for your vehicle’s repair, maintenance, or upgrade project!

    Dan the Gear Man Tech Notes:
    Synchro Assemblies
    Synchro Rings
    NV4500 Tools
    Matching Mainshaft Parts

    Matching Synchronizer Parts
    Lubricants, Sealants, Threadlockers
    Matching Parts
    Applications

    Tech Note 1: Synchro Assemblies
    QK1058 and QU10215 1-2 Synchronizer Assemblies for New Venture NV4500 5 speed manual transmissions are physically interchangeable. The interlock feature, which was used on 1992-1994 GM transmissions with 6.34: 1st gear ratio, was designed to prevent high speed down shifting in 1st and 2nd gear. To accomplish this, four sliding blocks and two springs are added to the synchro hub. When the mainshaft is rotating at high speeds, centrifugal force pushes the blocks against the sliding clutch ring and locks it in place. The early synchro hubs were slotted for the four blocks, plus there was four holes in it for the spring hooks. Once the interlock feature was abandoned after 1994/1995, the synchro hub was redesigned to eliminate the hub slots and holes. If you have the early QU10215 Synchronizer with interlock, you can convert it to a non-interlock unit simply by removing the four flyweight blocks and two c-shaped springs. The sliding hub plus the synchro springs and rectangular struts are the same for all years and models.

    Tech Note 2: Synchro Rings
    All New Venture NV4500 transmissions use three synchronizer rings for 1st gear and for 2nd gear. The inner and outer rings are made of steel, while the center ring is faced with carbon fiber on both sides.

    Tech Note 3: NV4500 Tools
    Need Torque Specs or Rebuild procedures? Order my 116 page, full color illustrated TM1003 NV4500 Rebuild Manual.

    You will need some special tools to correctly service your NV4500 Transmission. The chart below lists our current NV4500 Special Tools for popular models.

    TOOLS for SPECIFIC NV4500 MODELS

    Component 23 Spline
    Dodge 4×4
    NV4500LD
    29 Spline
    Dodge 4×4
    NV4500HD
    30 Spline
    Dodge 4×2
    NV4500LD
    31 Spline
    Dodge 4×2
    NV4500HD
    32 Spline
    GM 4×4
    35 Spline
    GM 4×2
    Mainshaft Nut QT2002 QT2001
    QT2036
    QT2002 QT2001
    QT2036
    QT2002
    QT2028
    1-1/2″ Hex
    Socket
    Mainshaft Holding NLA QT2000 NLA QT2011 N/A N/A
    5th Gear Nut
    Torx Cross Bolt
    N/A QT9205 N/A QT9205 N/A N/A
    Output Seal Installer N/A QT1801 N/A QT2058
    CALL
    Not Used Not Used
    Tailshaft Bushing Remover and Installer Not Used Not Used Not Used QT2044 Not Used Not Used

    TOOLS For ALL NV4500 MODELS

    Countershaft
    Front Bearing Cup Installer
    QT1802 Use with QT1101 or QT1119 Driver Handle. Also can use flat side to install Dodge 4×4 Rear Output Seal
    Countershaft Front Bearing Installer QT2004 Can also use to press 3-4 Synchro Hub on original equipment mainshafts
    Input Bearing & Countershaft Rear Bearing Installer QT2005 Can also use to install Input Seal
    Input Bearing Cup Installer QT1801 Use with QT1100, QT1101, QT1116, or QT1119 Driver Handle.
    Countershaft Support QT2006 Use to support front of countershaft when installing countershaft rear bearing
    1-2 Synchronizer Support QT2008 Use to support 1-2 synchronizer hub during synchronizer assembly
    10mm 1/2″ Drive 12 Point Socket QT1020 USA Made Impact Socket for Factory Tailshaft Housing Bolts
    Long Shank Punch for Shift Lug QT9300 3/16″ x 8″ Shank for 5th Gear Shift Lug Roll Pin

    Tech Note 4: Matching Mainshaft Parts
    Matching Popular Mainshaft Part Numbers for QK1058 1st-2nd Synchro are:

    Application Mainshaft Engine Output Spline
    1992-1993 Dodge 4×4
    1994-2005 Dodge NV4500LD
    QU10214 Gas V8 23
    1994-2004 Dodge 4×4 NV4500HD QA1045
    or
    QU10011
    Diesel or V10 29
    1995-2004 Dodge 4×2 NV4500HD QU10013 Diesel or V10 31
    1992-2007 GM 4×4 QU10098 All 32
    1997-2007 GM C-Series 4×2 QU10719 All 35

    Tech Note 5: Matching Synchronizer Parts
    NV4500 Transmissions have 3 1st Gear Synchronizer Rings. Matching Synchronizer Parts are:

    Gear Synchronizer
    Assembly
    Synchronizer
    Hub
    Synchronizer
    Slider
    Strut
    Kit
    Synchronizer
    Ring
    1992-1993
    Dodge
    QK1058 Not Available QU10081 QK1100 QU10002**
    1992-1995
    GM
    QU10215* Not Available QU10081 QK1100 QU10002**
    1994-1995 Dodge QK1058 QU10038 QU10081 QK1100 QU10002**
    1996-2007 All QK1058 QU10038 QU10081 QK1100 QU10002**

    *QU10215 1-2 Synchronizer Assembly with Shift Interlock can be replaced by QK1058 if desired. The Shift Interlock was intended to prevent down-shifting at high speeds.

    **QU10002 is the Center Friction Ring. QU10014 is the Inner Steel Ring. QU10015 is the Outer Steel Ring.

    Tech Note 6: Lubricants, Sealants, Threadlockers
    Early production NV4500 Transmissions used an anaerobic sealant (QU90003) to seal between the main case and input bearing retainer, top cover, and rear housing. Mid-production units used anaerobic sealant just on the input retainer and RTV for everything else. Later production transmissions used black RTV Sealant (QU90006 or QU90005) for everything. Either type of sealant works fine (except the PTO covers ALWAYS should be sealed with RTV), but I prefer RTV for all components. Regardless of which sealant you use, make sure excess sealant does not block the lube access hole at the top of input retainer pilot that fits into the transmission case! Also, the threaded holes in the main case for the four retainer bolts and 12 PTO bolts are open ended, so you must use new bolts with factory applied threadlocker or apply Threadlocker (S24200) to your existing bolts to prevent oil seepage past the bolt threads. See my TM1003 NV4500 Shop Manual or VSG1003DVD NV4500 Overhaul Video for more information.

    Lubricant and Chemical List for NV4500 Transmissions:
    QU90020 NV4500 Manual Transmission Oil
    QU90003 Anaerobic Sealant
    QU90006 3.35 oz Ultra Black RTV Sealant
    QU90005 0.5 oz Ultra Black RTV Sealant
    S24200 6ml Medium Strength Blue Threadlocker
    S9978 1 gram Medium Strength Blue Threadlocker
    S9979 1 gram High Strength Red Threadlocker
    S24026 High Temperature Threadlocker for Mainshaft Nut

    Tech Note 7: Matching Parts
    Other Matching Parts for QK1058 1st-2nd Synchro:
    QU10002 Synchronizer Ring, Center Friction
    QU10014 Synchronizer Ring, Inner Steel
    QU10015 Synchronizer Ring, Outer Steel
    QK1103 Snap Ring Kit, 1-2 Synchro
    QU10075 39 Tooth Mainshaft 1st Gear
    QU10035 37 Tooth Mainshaft 2nd Gear
    QU10052 1-2 Shift Fork
    QU10001 Premium Bearing and Seal Kit 1992-1996 Dodge
    QU10005 Premium Bearing and Seal Kit 1997-2005 Dodge
    QU10061 Premium Bearing and Seal Kit 1992-1995 GM 4×4
    QU10062 Premium Bearing and Seal Kit 1996-2005 GM 4×4
    QU10063 Premium Bearing and Seal Kit 1992-1995 GM 4×2
    QU10064 Premium Bearing and Seal Kit 1996-2007 GM 4×2
    QU90020 NV4500 Manual Transmission Oil
    TM1003 NV4500 Shop Manual
    VSG1003DVD NV4500 Overhaul Video
    Chevy & GMC Shop Manuals
    Dodge & Ram Shop Manuals

    Applications:

    Chevy and GMC:
    C1500, K1500, C2500, K2500, C3500, C3500HD, K3500 with NV4500 5 Speed: 1995, 1996, 1997, 1998, 1999
    C2500, K2500, C3500, K3500 Standard and HD Pickup based models with NV4500 5 Speed: 2000, 2001, 2002, 2003, 2004, 2005, 2006
    C3500HD 15,000 Lb. GCVW Cab and Chassis with NV4500 5 Speed: 2000, 2001, 2002
    C2500, K2500 Silverado Classic and Sierra Classic with NV4500 5 Speed: 2007

    Dodge and Ram:
    D250, W250, D350, W350 with Cummins Diesel AND our NV4500 Transmission Retrofit Kit: 1989, 1990, 1991, 1992, 1993
    Ramcharger, D150, W150 with NV4500 5 Speed: 1992, 1993
    D250, W250, D350, W350 with Gas Engine and NV4500 5 Speed: 1992, 1993
    Ram 2500, Ram 3500 with V10 and NV4500HD 5 Speed: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
    Ram 2500, Ram 3500 with Cummins Diesel and NV4500HD 5 Speed: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
    Ram 2500, Ram 3500 with gas V8 and NV4500LD 5 Speed: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005

    Add a Review

    Your email address will not be published. Required fields are marked *