Free shipping on orders over $15

Shopping Cart

  • No products in the cart.

Alpine Microphone Mount | ’10 – ’24 4Runner

$11.00 $8.80

  • Shipping Icon
    Free
    Shipping
  • Shipping Icon
    Safe
    Payment
  • Shipping Icon
    Best
    Services
Categories :
  • Automotive parts
  • Alpine Microphone Mount for 20102024 Toyota 4Runner

    We’re proud to offer a clean, factory-style solution for mounting your Alpine aftermarket microphone in the OEM microphone location of your 20102024 Toyota 4Runner. This mount tucks the microphone neatly into the headliner console, maintaining a clean appearance while ensuring optimal voice clarity and performance.

    Key Benefits:

    • Utilizes your 4Runners factory microphone location
    • Provides a clean, OEM-style look
    • Maintains excellent microphone clarity and function

    Installation Instructions

    Remove the Headliner Console

    • If equipped with a sunglasses compartment: Open it and remove the two screws.
    • If equipped with terrain knobs (TRD Pro, Off-Road, etc.): Gently pull off the control panel to reveal the screws, then remove them.
    • Pull the front of the console straight down to release the pressure clips.

    Disconnect Console Wiring

    • Unplug the wiring harness connector from the console.

    Remove Factory Microphone

    • Locate the black rectangular factory mic.
    • Push it forward to release the dome light switch and cover.
    • Unplug the mic and reinstall the dome light switch and cover.

    Mount the Alpine Microphone

    • Push the rounded end of the microphone through the opening of the mount.
    • Ensure the rounded end sits near the bottom of the center mount support.

    Install the Microphone Mount into Console

    • Insert the mount into the headliner console with the legs facing down.
    • Push until it clicks securely into place.

    Route the Microphone Wire

    • Run the wire from the headliner console toward the rearview mirror.
    • Reinstall the console while pulling any slack toward the mirror.
    • Continue routing the wire along the top of the windshield toward the drivers side A-pillar.
    • Tuck the wire behind the A-pillar cover and run it down to the drivers footwell.
    • Route the wire under the dash to the back of your Sony bundle.
    • Plug the 3.5mm jack into the red microphone port on the Sony radio chassis.

    Test Functionality

    • Power on the system and confirm the microphone is functioning properly.
    Add a Review

    Your email address will not be published. Required fields are marked *