QK4770U Used Front 4×4 Spindle Nut and Washer Set for Dana 44 (Dodge, Ford), GM 10 Bolt (Chevy/GMC) front drive axles. This Set was used on many SUV’s, 1/2 ton and 3/4 ton Chevy, Ford, and GMC trucks with serviceable wheel bearings. GM usedQU40429 from 1982 to 1991, Ford Dana 44IFS axles hadQU40429 off and on from 1981 to 1996. Dodge used it from 1980-1984. Available While Supplies Last.

Also See: QK4770 New Front 4×4 Spindle Nut and Washer Set USA Made

Also seeQK4727 Spindle Nut Kit.

Need More Info? Use the handy Links below to access over 40 years of Dan’s product and vehicle specific Tech Notes to easily get the information you need for your vehicle’s repair, maintenance, or upgrade project!

Dan the Gear Man Tech Notes:
Automatic Locking Hubs
Fits 1-5/8 Thread Dia.
Pin

Tech Note 1: Automatic Locking Hubs
QK4770 was mainly used on vehicles with available automatic locking hubs. The four tabs onQU40429 Washer engaged 4 slots in the automatic hub body.

Tech Note 2: Fits 1-5/8 Thread Dia.
QK4770U fits spindles with thread diameters of 1-5/8″. The component parts are:QU40004 Inner Spindle Nut,QU40429 Spindle Nut Lock Washer, andQU40031 Outer Spindle Nut.

Tech Note 3: Pin
The pin that protrudes from the outboard face ofQU40004 Inner Spindle Nut is an anti-rotation device that engages with one of the holes inQU40429 Spindle Lock Washer. Installing the lock washer without having the pin engage one of the holes will either break or bend the pin. Improperly installed nuts and washer sets can back off during vehicle operation and possibly cause the hub and wheel assembly to fall off which may lead to severe injury or death.

Applications: Dana 44 SUVs, ton and ton, and GM 10 Bolt
Dodge: 1980, 1981, 1982, 1983, 1984

Ford: Off and on from 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996

Chevy, GM 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991