QU40031U USED Outer 4 Slot 4×4 Front Spindle Nut is a used part for Dana 30 (Ford Bronco) Dana 44 (All Makes), GM 10 Bolt (Chevy/GMC) and 1973-1977 Ford F-250 Crew Cab Dana 60 front drive axles. This 1-5/8″ thread nut was used as the outer spindle nut on most SUV’s, 1/2 ton and 3/4 ton Chevy, Ford, and GMC trucks with serviceable wheel bearings from the late 1950’s to the early 1990’s. Dodge used it from 1969-1974 and 1980 to 1993, Jeep J-series full-size 4x4s had it from 1973-1989.

Also See: QK4727 and QK4770 Spindle Nut Kits
Also See: QU40031 New Outer 4 Slot Spindle Nut

Need More Info? Use the handy Links below to access over 40 years of Dan’s product and vehicle specific Tech Notes to easily get the information you need for your vehicle’s repair, maintenance, or upgrade project!

Dan the Gear Man Tech Notes:
Fits
Spindle Nut Sockets
Applications

Tech Note 1: Fits
QU40031U Spindle Nut fits spindles with thread diameters of 1-5/8″.

Tech Note 2: Spindle Nut Sockets
Use withQT1012 or QT1025 Spindle Nut Sockets. The spindle nut tightening procedure and torque specification varies widely depending upon the year and model. Consult a factory shop manual for your vehicle.

Applications:
Most SUV’s, 1/2 ton, and 3/4 ton with serviceable wheel bearings (late 1950’s to early 1990’s)

Ford:
Dana 30 (Ford Bronco) and Dana 44 (all makes)
F-250 Crew Cab (Dana 60 front drive axles): 1973, 1974, 1975, 1976, 1977
F-150, F250, Bronco, Dana 44 1978-1979

Chevy/GMC:
GM 10 Bolt

Dodge:
1/2 ton and 3/4 ton: 1969, 1970, 1971, 1972, 1973, 1974, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993

Jeep:
J-series full size 4x4s: 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989