DISCONTINUED-NO LONGER AVAILABLE

QU40514 32 Spline Dana 60 Loaded Differential Case Assembly Kit for 2000-2002 Dodge Ram is a genuine Dana-Spicer Loaded Diff Case for 2000-2002 Dodge Ram 2500, Ram 3500 4×4 trucks with 4.10 or 3.54 ratio Dana 60 front axles. Kit includes Loaded Differential Case with internal gears, Diff Side Bearings, Ring Gear Bolts and Differential Shim Kit. New No Longer Available

Also See: QU40514U Used 32 Spline Dana 60 Loaded Differential Case for 2000-2002 Dodge Ram available while supplies last.

Also See:
QU40485 32 Spline Internal Differential Gear Kit
QU40254 Bare Diff Case Kit

Need More Info? Use the handy Links below to access over 40 years of Dan’s product and vehicle specific Tech Notes to easily get the information you need for your vehicle’s repair, maintenance, or upgrade project!

Dan the Gear Man Tech Notes:
Tech Help
Includes
Inner Axle Seals
Matching Parts

Tech Note 1: Tech Help
When replacing your old differential case with a new one, you will need QT1098 Master Bearings and a dial indicator to determine the new shim pack thicknesses. Service procedures are covered in my 26 page, color illustrated TM4400 Pinion and Differential Bearing Service On Dana-Spicer Monobeam Axles with over 75 photos.

Tech Note 2: Includes
QU40514 Dana 60 Loaded Differential Case Kit includes:
QU40254 Bare Differential Case Kit
QU40485 32 Spline Internal Differential Gear Kit (Factory Installed)
QU40184 Differential Bearing Kit
12 QU40086 Ring Gear Bolts
QU40206 Differential Shim Kit

Tech Note 3: Inner Axle Seals
Given the era of trucks this diff fits, it is recommended you replace the inner axle seals which can become hard and brittle with age. For Inner Axle Shaft Seal Kits with oil seals and installation tools see: QK4621 2000-2002 with CAD (Central Axle Disconnect), or QK4802 2002 non-CAD (No Central Axle Disconnect).
Left Seal, All Years: Pressed into the left axle tube next to the differential for all years. Differential removal is required. Use QU40298 Seal.
Right Seal, 2000-2002.5 with CAD: Pressed in the axle tube outboard of the CAD shift unit. CAD shift unit and right axle shaft removal required to replace seal. Use QU40271 Seal.
Right Axle Seal 2002 without CAD: Pressed into the right axle tube next to the differential. Differential removal is required. Use QU40298 Seal.

Tech Note 4: Matching Parts
Matching Parts for QU40514 Dodge Dana 60 32 Spline Diff Assembly:
QU40367 Dana Original Equipment Model 60/70 Differential Cover Pan Gasket
QU42029 Dana Reusable Model 60 Differential Cover Pan Gasket
QU40298 Left Inner Axle Shaft Oil Seal. Also fits Right Side on 2002 axles without CAD
QU40271 Right Inner Axle Shaft Oil Seal for 2000-2002.5 axles with CAD
S82194 RTV Sealant
S24200 Threadlocker
QU90008 Gear Marking Compound
QU40343 Differential Cap Retaining Bolt
QU40090 CAD Housing Gasket
QK4732 Outer Axle Shaft Nut and Washer Kit
QU10963 Right Brake Shield for 2000-2002 Ram 2500, Ram 3500
QU10964 Leftt Brake Shield for 2000-2002 Ram 2500, Ram 3500
QU10594 Hub to Knuckle Bolt 2000-2002
QU10943 Differental Output Shaft 2000-2002.5 with CAD, 32 splines inboard x 18 splines outboard
TK40574 32 Spline Right Inner Axle Shaft 2002 without CAD
QT1158 Differential Bearing Installer
QT1098 Differential Master Bearings
QT1032 and QT1219 Differential Case Spreaders

Applications
Dodge Ram:
Ram 2500, Ram 3500: 2000, 2001, 2002