QU50586 Replacement Type B Front Driveshaft Replacement Boot Clamp is a stainless steel, high tension, one ear clamp with 360 clamp pressure for either end ofQU20138 Type B 9 Bellow Ford Driveshaft Slip Joint Boot for Male Spline Slip Yokes. USA Made.

Need More Info? Use the handy Links below to access over 40 years of Dan’s product and vehicle specific Tech Notes to easily get the information you need for your vehicle’s repair, maintenance, or upgrade project!

Dan the Gear Man Tech Notes:
Use Clamps
Clamp Tool
Boot
Matching Parts for 1999-2004 Super Duty and Excursion
Matching Parts

Tech Note 1:Use Clamps
I often see people use plastic tie straps or twisted wire instead of the correct stainless steel clamp in an effort to seal their driveshaft boot. Unfortunately, you can’t get enough clamping pressure from those makeshift methods so water infiltrates into the slip joint. Once water gets in the slip joint, rapid spline wear occurs which will require the big buck repair of replacing the entire slip joint or possibly the whole driveshaft. If you want to seal the boot, use the right boot clamp which will positively seal the entire 360 circumference.

Tech Note 2:Clamp Tool
Using a QT4018i Clamp Tool specifically made to tighten eared clamps around the driveshaft boot is the best way to tension a stainless steel Boot Clamp to provide an air and watertight seal. If a Clamp Tool is not available, you may be able to get by with a nail puller or hoof nippers. Wire cutters could be used in an emergency situation as a last resort, but the results are often unsatisfactory.

Tech Note 3:Boot
A boot protected driveshaft slip joint will usually outlast the truck as as long as the boot is intact and there is some grease on the splines. If your Boot is damaged, REPLACE IT! If your Boot is OK, but you are doing other driveshaft service, always clean and grease the splines AND replace the clamps!

Tech Note 4: Matching Parts for 1999-2004 Super Duty and Excursion
Saved for Future Use

Tech Note 5: Matching Parts for 2005-2016 Super Duty
Exploded View XV514 2005-2016 Ford Super Duty Front CV Driveshaft
QU20103Driveshaft Bolt
QU40805 Replacement CV Flange Yoke
QU40524 OE CV Flange Yoke
QU40829 CV Ball Seal
QU40835 CV Joint Tension Spring
QU40744CV Ball and Seal Kit
QU40800 CV Center Yoke
QU40704 CV Joint Ball Seal
QU40825 CV Ball Stud Tube Weld Yoke
QU40863 CV Joint Head Assembly
TK40981 Premium 2.75″ x 0.083″ DOM Driveshaft Tubing
QU20373U Used Splined Slip Yoke Socket
QU20138 Boot Kit
QU20372 Splined Slip Yoke Shaft
QU40874 Replacement Slip Stub
QU40802 Screw-On Slip Yoke Seal
QU40875 Slip Yoke
QU40709 Strap and Bolt Kit
TK40719Premium U-Joint
QU40731Greaseable U-Joint
QU40873 EZ-Grease U-Joint

Applications
Ford:
4×4 Excursion and 1999, 2000, 2001, 2002, 2003, 2004 Super Duty with late production or replacement front CV driveshaft assemblies
4×4 Super Duty front CV driveshafts: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016